Install Cutter

Please follow the instructions below, to download and install the software correctly, some files below are  compressed, and an unzip program is required to unzip. if you do not already have this you can download this by clicking the link below

Click Here to download WinZip

Follow the Video instructions, all the files in the Video are Downloadable, further Down, together with Text and Picture instructions.

 

Do not, under any Circumstance install, or plug the USB lead into the pc, before installing this first.

step 1

First click Here to Install  

choose save file, when asked to a location, on your Computer ( save all the files from here to the same location for easy access)

 

step 2

Download the installer licence by clicking here save the file somewhere on your PC, when download is complete, click open folder and then double click on the file Redsail.exe follow instructions and install, then move to step 3.

step 3

After completing step 1, please install the software by clicking the link below, Choose save file, when asked to a location, on your Computer ( save all the files from here to the same location for easy access)

Click Here to Download software

step 4

Once downloaded, unzip and explore the folder wentai  in this folder double click on the file install artcut2005 follow the onscreen instructions, and proceed to the next step below

Open up art ( there should be a short cut on your desktop ) and type some text in, choose cut and the cutter should then start cutting.

 

Trouble shooting

should your cutter not cut after selecting cut, follow these procedures.

press start button , select control panel, then system, then hardware, then device manager. when in device manager look down to where it says LTP/COM click the + sign next to that. and you should then see the cutter. check that this is on com port 3, if its not. select properties and choose advanced, then select port 3 from the drop down ( you will see a warning message) ignore the message and proceed. return to artcut and select cut again. and it should work